/ Products / RTI PIKO RGB
RTI PIKO RGB
Sharp rays and vivid colors

RTI PIKO RGB

Sharp rays and vivid colors

Built with the latest RTI semiconductor laser module technology.

The RTI PIKO RGB projectors are compact show laser systems in a robust, dust-proof housing. The high-end show lasers are ideal for highly professional laser show applications of all kinds. The projectors are completely manufactured in Germany and are built with the latest RTI semiconductor laser modules.

The PIKO 30 comes with a green OPSL module, while the PIKO 33 comes with a more powerful green RSL module.

These new RSL modules with their very low divergence and a homogeneous beam shape make the RTI PIKO RGBs highly professional laser systems. The small beam diameter of only approx. 5.0 mm enables the use of small scanner mirrors with less inertia, which enables high scanning speeds.

The standard scanners can be operated with a maximum scan speed of 45 kpps @8° ILDA and a maximum scan angle of 50°. CT-6210 scanners with Turboscan drivers are optionally available, enabling even higher scanning speeds of up to 60kpps at ILDA 8°.

The emergency stop signal can be looped through the interlock through connection and only one emergency stop switch is required for several devices. Control signals can be looped through directly via the network switch, which is also integrated.

The powerful RTI PIKO RGBs are suitable for indoor and outdoor applications, e.g. at concerts, festivals and other major events. Demanding graphic projections and projections over long distances are no problem for these devices thanks to the low divergence.

Equipment

Wavelength 638-639 nm 520-530 nm 445-450 nm
W R G B
PIKO 30 30 8 10 16
PIKO 33 33 8 13 16
Control Modes

ILDA, LAN (Software), DMX, ArtNET, ILDA-Streaming, Stand-Alone

Scanner
45kpps ILDA 8°, max. 50°
Divergence
0,7 mrad
Beam Specs
5 mm
Dimensions
L 49,1 cm x W 27,1 cm x H 29,6 cm
Weight
27 kg
IP Rating
54
Scope of Delivery
Incl. waterproof flightcase, interlock connector, key, power cable, manual,; full version Showeditor software license included

Properties

  • 30 – 33 W guaranteed power
  • Modern RTI semiconductor laser module technology (RSL) for a very good beam profile in RGB
  • Green Coherent Taipan OPSL (PIKO 30)
  • Maintenance-free laser modules
  • Integrated touch display for adjusting the basic functions
  • Integrated network switch for looping through the control signal
  • FB4-QS MAX integration optionally possible
  • Robust, roadworthy case with 360° bracket with quick release system

ShowNET Mainboard Features

Each RTI PIKO and NANO device is delivered with a ShowNET laser mainboard as standard. This means it has a multitude of control features already built-in: Control via DMX or ArtNET, just like a normal lighting fixture, are possible as well as computer control via ILDA or LAN. Of course the laser can be run in stand-alone operation, too. The contents for playback (for DMX, ArtNET, Stand-Alone, etc.) can be fully customized.
DMX / ArtNET control
ShowNET can be easily controlled by DMX / ArtNET for convenient laser control via conventional lighting consoles or lighting software.
Custom ILDA files can be stored on the internal SD card of the ShowNET and can then be triggered via DMX / ArtNET. Although the ShowNET already has a preset of frames and animations, all content can be customized.
ShowNET has an integrated ArtNET node, so lasers with integrated ShowNET as mainboard can be easily connected via LAN cable.
Stand-alone laser operation
The automatic/stand-alone mode plays the ILDA files from the SD card. The entire set of files is played in sequence. It is also possible to play only a single file via a setting change. The files can be selected individually.
DAC / Interface for software
ShowNET can also serve as a direct output DAC for the professional laser show control software Showcontroller: Simply connect the laser and computer to a standard network/Ethernet infrastructure and use Showcontroller with ShowNET as the DAC. Showcontroller license dongles are available from your dealer.
ILDA-Streaming
ILDA streaming is the real-time signal transmission of an ILDA signal via a combination of transmitter and receiver over a network (LAN).
It is possible to use the ShowNET interfaces as transmitters or receivers for ILDA streaming. While the external ShowNET devices can act as both transmitters and receivers, the internal ShowNET interfaces focus on receiver functionality. receivers, the internal ShowNET interfaces focus on receiver functionality.
On the way to the world. Your new laser projector.

Chat

Contact us directly through our live chat using the chat logo on the bottom left screen corner.

E-Mail

If you have any questions, you can send us an email at any time.

Phone

We would be happy to help you
by phone.
.
To top
0%
This site is registered on wpml.org as a development site.