PHAENON XD

High-end color laser projector for professional applications

PHAENON XD

High-end color laser projector for professional applications

The PHAENON XD 30 Y from the PHAENON XD series stands for uncompromising color reproduction at a professional level: red, green, blue and yellow are combined into a single, high-intensity beam – with a guaranteed optical output of 30 watts and at least 26 watts at the aperture.

At its core is a modular laser system by LaserAnimation, combining red and blue laser diodes with a green 532 nm and a yellow 577 nm Genesis Taipan OPSL laser source.

To ensure this interplay works reliably over the entire lifespan of the laser sources, the PHAENON XD 30 Y strictly adheres to the operating temperature and current limits specified by the manufacturer. Carefully selected, expertly aligned optics for beam shaping, combination and focusing ensure a homogeneous, sharply contoured beam with low divergence – even over greater distances.

Control is handled by the intelligent LaserAnimation Sollinger mainboard, giving the laser operator extensive control and configuration options, for example via LA.toolbox, as well as modern transmission methods such as AVB.

With housing dimensions of 42.0 x 40.6 x 22.3 cm, the PHAENON XD 30 Y offers ample room for its powerful technology – optionally also available in an IP65-rated version for outdoor use.

The laser projectors of the PHAENON series have long stood in the industry for outstanding quality and exceptional reliability, complemented by guaranteed safety and high ease of use. This makes them the first choice of numerous renowned companies in the events industry for extensive laser installations.

The PHAENON XD 30 Y is delivered standard in a rugged flightcase.

Equipment

	Guaranteed optical output*	Minimum power*	R 638 nm	G 532 nm	B 445 nm	Y 577 nm
XD 30 Y	30 W	26 W	9.6	8	8	6
	* at laser module	* at aperture

Control Modes

AVB / TSN interface for streaming ILDA data via Ethernet, AIFF player function, Stand-alone player, ILDA, DMX / ArtNET, Control software “LA.toolbox” for PC or Mac included

Scanner

CT-6210 scanner with LaserAnimation's proven Turboscan XD driver electronics for excellent projection quality Scanning speed: 60 kpps at 8°, maximum projection angle: 80° (typically 50°), response time (2° opt. step): < 0.2 ms, aperture: 4,5 mm

Divergence*

<0.5 mrad

Beam Specs

4.5 mm

Dimensions

L 39,0 cm x W 40,6 cm x H 23,3 cm

Weight

32 kg

IP Rating

IP54

Scope of Delivery

LA.toolbox, power cable, user manual, Interlock connector, key switch, flightcase

*FWHM average depending on model

Properties

Modular laser system featuring red and blue combined laser diode modules manufactured by LaserAnimation (patented combiner technology from Berlin), combined with a green and a yellow Coherent Genesis Taipan OPSL source
Integrated intelligent LaserAnimation Sollinger Mainboard
Control via “LA.toolbox” Software (included in delivery)
- electronic mask
- Color correction
- DGC (Digital Geometric Correction)
- Laser Disable
AVB / TSN interface for Streaming data via Ethernet
Motorized beam adjustment for an exact color overlay
CT 6210 scanner with proven TurboscanXD driver electronics
Dante2ILDA internal optionally available
DSP Mark2 resp. DSP Mark2 playback optionally available
Pangolin FB4 optionally available
Grating module optionally available (6 gratings)
LA.brush optionally available
Flightcase included

You are currently viewing a placeholder content from Youtube. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.

More Information

Unblock content Accept required service and unblock content

Application Examples

PHAENON Mainboard Product Details

Electronic mask

This important function allows limiting the laser output for certain areas. The intensity of the laser beam can be adjusted in a range from 0% to 100% for each individual shape created with the editor. This makes it possible to correctly protect specific scanning areas such as the auditorium or sectors with optical equipment (video beamers, cameras). The big advantage of this mask, which is configured in the projector, compared to a mask generated in the show controller is the fact that programming errors which may occur when a show is edited will not disable the mask.

Color correction

Via the integrated color correction, the color channels can be adjusted from 0% to 100% with a resolution of 24 bit. With “White” the power for each laser source is calculated and corresponds to True White D65. With the function “Advanced” delays of the diodes can be set with a resolution of 5.2 µs.

DGC Mapping

Digital Geometic Correction

With Digital Geometric Correction, the projection image can be easily corrected and used for projectors or show controllers without integrated DGC. Sixteen different geometrical correction setups are available. For each setup the DGC Input and Output can be adjusted individually and the laser image can be corrected for projection on uncommen projection surfaces. For example: The projection surface is uneven and consists of two panels positioned at an angle. One half of the DGC Input has to be displayed on the left side of the uneven projection surface and the other half on the right side. First you choose which area of the DGC Input you want to display on the projection surface. Then, you correct the DGC Output so that the projection of the image is displayed correctly on the area of the projection surface.

The Laser Disable Button is a special safety button to interrupt the laser output via Ethernet. The Laser Disable Button can be easily integrated into the network and configured. The status of up to four different Laser Disable Buttons can be monitored via the PHAENON settings.

Accessories and upgrades

Add Upgrade to Inquiry

USB2AVB

Digital network protocol

Add Upgrade to Inquiry

DSP Mark 2 integrated

Add Upgrade to Inquiry

ILDA2AVB

Digital Network Protocol

Add Upgrade to Inquiry

Laser Disable Button LAN

Safety button to stop the laser output

Add Upgrade to Inquiry

DSP Mark 2 playback integrated

Add Upgrade to Inquiry

Grating Modul

For polar light and other laser effects

Add Upgrade to Inquiry

RTI COCOON Climate Housing

Outdoor Climate Housing

LA.toolbox Software

With this intuitive software it is possible to control important functions of the laser projector and adjust operating values.
The LA.toolbox is available as a PC version and Mac version. Both are supplied with every laser projector and are also available for download.

One Start Screen for all Connected Projectors

Clearly arranged interface to control each projector

Comprehensive Projection Settings

For all adjustments of the projection an internal test picture can be used in the projection menu. All settings concerning the projection

horizontal, vertical size
inversion
position offset
keystone correction and rotation

Comfortable "Timer Settings"

A timer can be used to switch the state of the laser at a predefined time. For instance the laser can switch from “Run” to “Standby” mode. Drop down menus are used to set the state which the laser is to switch to when a timer triggers as well as the date or date range (from/to), time of day and day of the week. Up to 6 timers can be configured.

ILDA Settings

Status Settings

Four laser statuses can be selected for laser operation: “Shutdown” I “Standby” I “Test 10%” I “Run”. In the “Shutdown” mode the drivers are deactivated and the temperature control is inactive. This saves considerable amounts of energy. In “Standby” there is no current to the laser sources, which also saves energy. However, in contrast to “Shutdown” their operating temperature is maintained. This has the advantage that switching from “Standby” to “Run” is possible much more quickly. One advantageous option is the automatic “Shutdown” resp. “Standby” function. This switches the laser into the corresponding operating mode in case no ILDA signal is present for a specific adjustable period of time (for instance at the end of a show). The device will use less electricity and cool off better.

Climate Status

Detailed Information Concerning the Internal Laser Sources

Electronic Masking - Laser safety in a new dimension

With this new safety technology we give users the option to use a graphics editor to flexibly define protected areas in a laser projection. The editor can be used in way similar to a vector based graphics program to create a mask from geometric shapes (polygons, circles and rectangles). Safety parameters can then be defined individually for each of these shapes.

Two different mask functions are available:
1. Electronic Mask This important function allows limiting the laser output for certain areas. The intensity of the laser beam can be adjusted in a range from 0% to 100% for each individual shape created with the editor. This makes it possible to correctly protect specific scanning areas such as the auditorium or sectors with optical equipment (video beamers, cameras). The big advantage of this mask, which is configured in the projector, compared to a mask generated in the show controller is the fact that programming errors which may occur when a show is edited will not disable the mask.
2. Safety Mask For safety reasons every laser projector is equipped with a scanner safety circuit to protect the audience. This mechanism determines the sum of the scanner velocities for the horizontal and vertical deflection of the beam and compares this to the predefined minimum speed. In case the beam velocity is below the minimum or if the beam is completely motionless this safety mechanism will block the laser beam.

For allowing beam effects with a stationary beam anyway in areas where the audience is not at risk, for instance below the ceiling, the “Safety Mask” can be used to graphically define several areas where a static beam will be possible, see picture. (Up to now only one rectangular safety area could be defined.)

Adjustable Beam Superposition

The Phaenon X laser projectors are equipped with a motorized beam adjustment for superposing the beams. This internal component allows an easy and comfortable adjustment of the beam superposition. This is a big advantage of the Phaenon X projectors which users will certainly appreciate.
The position of the individual beams can change over time when the projectors are frequently transported, set up and taken down again. Until now the beams could only be adjusted using the small adjustment screws on the side of the device. In everyday use the projectors are often already installed in a stage setup, e.g. attached to a truss high up, when the laser is turned on and the beam misalignment is discovered. This used to mean the laser had to be taken down again for adjustment. This considerable effort is no longer necessary using the “Beam Adjust” of the LA Toolbox Software.

DMX Support