Laser Disable Button LAN

Safety button to stop the laser output

The Laser Disable Button LAN is a special safety button to interrupt the laser output via Ethernet. Advantages:

Easy cabling, as already laid network cables can be used.
Compatible with switches and hubs.
Each Laser Disable button or the Laser Disable software sends a so-called “heartbeat” which is received by the devices connected to it. This causes these devices to automatically shut down if no signal is received due to missing connections, broken cables or power failure.

The Laser Disable is compatible with following devices:

Lasergraph DSP
PHAENON accurate
AVB2ILDA
PHAENON XD with built-in AVB2ILDA
RTI PIKO (from 2023)
RTI NANO (from 2023)

Configuration: In the Lasergraph DSP or the LA.toolbox, up to four independent Laser Disable buttons or the Laser Disable software can be selected via their IP address.

Control Modes

Laser Disable button with network monitoring, LA.toolbox

Dimensions

L 13,5 cm x W 8,6 cm x H 6,0 cm

Weight

0.4 kg

IP Rating

IP4X

Scope of Delivery

User manual, key for key switch

Properties

Easy cabling, as already laid network cables can be used
Compatible with switches and hub
Each laser disable button or laser disable software sends a “heartbeat” that is received by the connected devices. Thus, these devices automatically turn off when no signal is sent due to a missing connection, cable break or power failure
Robust housing (50 x 85 x 133mm)