High-end full color laser projectors exclusively based on Coherent Taipan laser sources manufactured by Coherent Inc. In the hybrid version, a blue LAS laser diode module with a wavelength of 450 nm is installed.


标准波长: 639 nm I 577 nm oder 590 nm I 532 nm I 488 nm / 480 nm I 460 nm



  • “电子遮罩”  可以用软件在激光覆盖范围内指定安全区域。 → 电子遮罩演示视频
  • 振镜安全回路
  • 可用物理手段调节的“光束切断功能”
  • 钥匙开关,内部锁死,提示激光可发射的LED指示灯






X,Y振镜CT 6210H(剑桥技术)配合LaserAnimation久经考验的Turbo Scan驱动系统

  • 扫描系统速度:>30k(35k)
  • 孔径:4mm
  • 激光器投射开角:  80°(最大开角), 50°(正常使用)
  • 反应时间(2° opt. step): 0.2ms



  • 主交流电源接口:  Neutrik PowerCon
  • 激光信号接口, 模拟接口: ILDA In D-sub 25, 双输入
  • 远程控制: 7pin XLR (RS232, 外部钥匙锁, 内锁)         
  • DMX 输入/ 串连/ 输出: 5pin XLR
  • 以太网线接口 
  • 无线装置



  • 100-120V交流 / 200-240V交流 / 50-60Hz
  • 输入电流功率范围: 500 - 950W最大



  • 用带Windows系统的PC或者MAC OS X10.6后版本(带RS232-USB转接口)的Apple mac笔记本,安装'LA Toolbox"即可开始操作。
  • 用旋钮控制激光器背面的操作面板。 



  • 尺寸:  420 mm x 406 mm x 223 mm or 620 mm x 406 mm x 223 mm (L x W x H)
  • 机身外罩: 防尘, 黑色阳极氧化铝,塑化包裹边
  • 防护等级: IP54
  • 为Truss架悬挂而准备的极坚固的金属臂和安全绳   
  • 配备了激光头保护罩



  • 最高环境温度:  50°C
  • 最低环境温度:  - 5°C



  • 光栅模块 ,提供更多额外的背景效果
  • 激光控制系统Lasergraph DSP compact Mark 2



平台 标称输出功率 [mW]
总输出 黄/橙 绿
RGB 12500
compact 12,500
- 8000 - 2000
RYGB 25000 hybrid
regular 27,000
6000 8000 - 8000
RYGCB 30000 hybrid
regular 34,000
6000 10,000 5000 8000

关于 LA-Toolbox 激光器操控软件






1. 电子遮罩:




2. 安全遮罩:





This intuitive software allows monitoring important functions of the laser unit and adjusting operating parameters.

The LA-Toolbox software is available as PC and Mac version. Both versions are included with every shipment and are additionally available in the → Costumer Area of our website.



One Start Screen for all Connected Projectors


All functions and parameters / diagnosis of multiple laser projectors can be controlled by one "LA Toolbox" via ethernet.

For laser safety the 'Disable All' button is integrated to the user interface. The laser output for all connected laser devices is switched off immediately when clicking this button.

Clearly arranged interface to control each projector


For PHAENON X projectors the full functionality of the software is available.

For all "Basic" projectors (BLITZ, BLIZZARD, PHAENON) less functions are available.

Comprehensive Projection Settings

For all adjustments of the projection an internal test picture can be used in the projection menu.
All settings concerning the projection

  • horizontal, vertical size
  • inversion
  • position offset
  • keystone correction and
  • rotation

can be exactly adjusted with sliders in the clearly laid out "Projection" menu and saved in 3 different transformation settings.

Comfortable Timer Setting

A timer can be used to switch the state of the laser at a predefined time. For instance the laser can switch from "Run" to "Standby" mode.
Drop down menus are used to set the state which the laser is to switch to when a timer triggers as well as the date or date range (from/to), time of day and day of the week.
Up to 6 timers can be configured.

ILDA Settings

All 6 ILDA channels are scalable from 0% to 100% to achieve the best possible white balance. Up to 4 color settings can be saved and called up.
The ILDA signals 'Interlock' and 'Intensity' are evaluated.

State Settings

Four laser statuses can be selected for laser operation:
"Shutdown"  I  "Standby"  I "Test 10%"  I  "Run".

In the "Shutdown" mode the drivers are deactivated and the temperature control is inactive. This saves considerable amounts of energy.

In "Standby" there is no current to the laser sources, which also saves energy. However, in contrast to "Shutdown" their operating temperature is maintained. This has the advantage that switching from "Standby" to "Run" is possible much more quickly.

One advantageous option is the automatic "Shutdown" resp. "Standby" function. This switches the laser into the corresponding operating mode in case no ILDA signal is present for a specific adjustable period of time (for instance at the end of a show).
The device will use less electricity and cool off better.

Climate State

Ambient temperature, heat sink temperature, internal and dew point temperature, relative humidity as well as fan voltage are clearly displayed.

Detailed Information Concerning the Internal Laser Sources

The states of all laser sources can be monitored, the power can be scaled and the behavior of the laser with a small modulation signal can be adapted slightly through the "Bias Offset". This setting allows the best possible adjustment of the effective soft blanking of the Lasergraph DSP.

Electronic Masking - A New Dimension of Laser Safety

With this new safety technology we give users the option to use a graphics editor to flexibly define protected areas in a laser projection.
The editor can be used in way similar to a vector based graphics program to create a mask from geometric shapes (polygons, circles and rectangles). Safety parameters can then be defined individually for each of these shapes.

Two different mask functions are available:

1. Electronic Mask


This important function allows limiting the laser output for certain areas. The intensity of the laser beam can be adjusted in a range from 0% to 100% for each individual shape created with the editor. This makes it possible to correctly protect specific scanning areas such as the auditorium or sectors with optical equipment (video beamers, cameras).
The big advantage of this mask, which is configured in the projector, compared to a mask generated in the show controller is the fact that programming errors which may occur when a show is edited will not disable the mask.

2. Safety Mask


For safety reasons every laser projector is equipped with a scanner safety circuit to protect the audience. This mechanism determines the sum of the scanner velocities for the horizontal and vertical deflection of the beam and compares this to the predefined minimum speed.
In case the beam velocity is below the minimum or if the beam is completely motionless this safety mechanism will block the laser beam.

For allowing beam effects with a stationary beam anyway in areas where the audience is not at risk, for instance below the ceiling, the "Safety Mask" can be used to graphically define several areas where a static beam will be possible, see picture. (Up to now only one rectangular safety area could be defined.)

Adjustable Beam Superposition


The Phaenon X laser projectors are equipped with a motorized beam adjustment for superposing the beams. This internal component allows an easy and comfortable adjustment of the beam superposition.
This is a big advantage of the Phaenon X projectors which users will certainly appreciate.

The position of the individual beams can change over time when the projectors are frequently transported, set up and taken down again. Until now the beams could only be adjusted using the small adjustment screws on the side of the device. In everyday use the projectors are often already installed in a stage setup, e.g. attached to a truss high up, when the laser is turned on and the beam misalignment is discovered. This used to mean the laser had to be taken down again for adjustment. This considerable effort is no longer necessary using the "Beam Adjust" of the LA Toolbox Software.



PHAENON X laser projectors can be connected to LAN (Ethernet) or WLAN and remote controlled using LA Toolbox.

DMX Support


An optionally integrated grating module can be controlled over DMX or manually with the "Grating Wheel Settings". Up to 4 settings can be saved.
The DMX base address can easily be configured using the software.




该光栅元件已经安装在新派送的激光器中(可选), 或者也可以选择在已有的设备中加入光栅。






该光栅元件可以通过DMX控制。 任何专业的DMX灯光控台都可以通过我们激光器上的DMX接口与激光器进行连接。



  • Wheel 1: GWT-2 (grid), Machado (ultra fine line), Stargate or SCNT (frost effect)
  • Wheel 2: GXT-1 (grid), LWT-2 (line), Lumia (haze)




例如Grid WT 可以通过图形投影创造出集中在中央的形状。
Machado 由一条精致的线组成,可以将一道光束转变成拥有不同颜色的扇状图像,产生出精益非凡的空间效果。
Stargate 有效将一个房间填充满图形形状或者光束。

Grid XT 通过大的图像产生图形形状。

Line 可以有效用于展示一排图像。

Lumia 可以产生特殊的激光效果,用于生成朦胧的图像。

Lumia narrow creates narrower hazy figures.

Stargate can effectively fill a room with a graphic pattern or a beam.



Our products